iPhone 13 - Black - Pulled Diagnostic Screen
Get A Ready-To-Install iPhone 13 - Black - Pulled Diagnostic Screen sourced from working donor units and verified on bench for display, touch, and pixel integrity. Expect a 6.1 inch super retina xdr oled panel at 2532 × 1170 resolution, 460 ppi density, 60 hz refresh, wide color p3, true tone support when data is transferred, typical 800 nits brightness, up to 1200its hdr peak, and a 2,000,000:1 contrast ratio. The assembly includes an integrated capacitive touch digitizer, a black bezel, and an oleophobic coating for smoother swipes and easier cleaning.
Each screen is function-tested for multi‑touch responsiveness, uniform backlight, color accuracy, and absence of lines or flicker, making it ideal for fast diagnostics, board-level work, and swap testing. The unit is intended for iPhone 13 only and does not include the ear speaker and sensor flex, so you will reuse your original module to keep face id and proximity performance.
Key specifications and compatibility
Fits model: iPhone 13. Model id: A2633. Panel type: oled, super retina xdr, 6.1 inch diagonal. Resolution: 2532 × 1170 at 460 ppi. Refresh rate: 60 hz. Brightness: 800 nits typical, 1200 nits hdr peak. Contrast: 2,000,000:1. Color: black. Features: wide color p3, true tone capable with eeprom data transfer, haptic touch, integrated touch digitizer, notch cutout for the front sensor array. Connectors: display and touch flex compatible with iPhone 13 mainboard. Glass: ion-strengthened cover with oleophobic coating.
Device compatibility is limited to iPhone 13 and excludes iPhone 13 mini, iPhone 13 pro, and iPhone 13 pro max. The screen is a pulled original suitable for diagnostics, refurb workflows, and as a donor for glass-only refurbishment when paired with lam and oca systems.
Use cases for repair benches and refurb lines
Use it as a fast triage display to separate board faults from display faults during intake, micro-soldering, or post-repair verification. Swap it onto suspect devices to validate boot, touch, auto-brightness, and color output before closing the job or ordering new stock.
Employ it as a refurbishment donor for glass-only projects where the oled and touch layers pass full pattern tests. Keep one on every bench to speed up turnaround reduce repeat diagnostics, and provide a known-good reference when training new technicians.
Installation and pairing notes
Transfer the original ear speaker and sensor flex to retain face id, proximity, and ambient light performance. Preserve true tone by cloning the display eeprom data from the customer’s original screen to this unit using a compatible programmer, then confirm auto-brightness and color temperature adjustments in settings.
Expect an ios part message if the display serial does not match the logic board, which does not affect basic function. Run a full post-install test covering touch grid, edge responsiveness, proximity trigger, auto-brightness ramp, color uniformity on gray and red patterns, and burn‑in check at low and high brightness.
