Macbook Complete A1707 Screen - Space Grey - OEM Quality
This Is A Complete 15.4‑Inch Retina Display Assembly built for the Macbook Pro A1707 in space grey and delivered in oem quality. It Arrives Assembled with lcd panel, anodized aluminum lid, clutch cover, hinges, antenna array, camera, cables, and gasket bezel pre‑installed for a fast swap. It Uses An ips led panel at 2880 × 1800 resolution (220 ppi) with :10 aspect ratio, 60 hz refresh, wide color (p3), up to 500 nits brightness, and an anti‑reflective coating for reduced glare. It Includes The Facetime hd 720p camera and ambient light sensor for auto‑brightness, and it retains the factory lamination for uniform backlight and sharp contrast. It Ships In Space Grey to match the original finish and maintain consistent cosmetic standards across refurb fleets.
This Assembly Maintains Original cable routing and connector layout for the a1707 logic board. It Uses A 30‑pin edp display link and separate camera and antenna connections integrated into the hinge area. It Comes With Pre‑set hinge alignment and tension out of the box, allowing you to transfer the unit without re‑bushing or re‑pinning the clutch. It Is Designed For Shops that need repeatable quality, predictable color, and reliable fit without rework.
Compatible Macbook Pro 15‑Inch A1707 Replacement
This Part Is Compatible Only with macbook pro 15‑inch a1707 models from late 2016 mid 2017. It Matches Emc 3072 and emc 3162 and the model identifier macbookpro13,3. It Is Not Compatible with a1990 (2018–2019) or any 13‑inch variants a1706 or a1708. It Supports The Original ambient light behavior and sleep sensor functions of these years and does not add true tone, which is not present on a1707.
This Assembly Is An Ideal Fix for cracked glass, no image with backlight, stage‑light backlight failure from flex, severe image retention, flicker, camera faults originating in the lid, and lid cosmetic damage. It Restores Factory geometry, bezel compression, and lid balance so you can return machines to enterprise or retail customers with confidence in color, brightness, and hinge feel.
Assembly Contents, Cables, And Finish Details
This Kit Includes The lcd panel, aluminum top case in space grey with apple logo inlay, clutch cover, left and right hinges, wifi and bluetooth antenna set with coax pigtails, edp display cable camera cable, facetime hd camera, ambient light sensor, rubber perimeter gasket, and screw posts. It Excludes Bottom‑case screws and logic‑board screws, which you will reuse from the host machine, and it does not include microphones or the display board since those reside in the chassis on a1707.
This Finish Matches Oem space grey with hard anodizing for abrasion resistance and consistent color across batches. It Uses Factory‑spec lens and diffuser films to preserve viewing angles and p3 gamut coverage. It Delivers Even Backlight with low mura and tight delta‑e targets so mixed‑fleet panels remain visually consistent after replacement.
Installation Notes And Bench Testing For Repair Shops
This Swap Starts With Battery Disconnect, bottom cover removal, and logic‑board cable isolation to protect the edp line. It Proceeds With Antenna lead release, camera and display connector removal, hinge screw removal, and lid lift‑off at 90 degrees. It Installs In Reverse order, routing cables through the hinge channel without pinching and seating the edp fully flush. It Is Recommended To Apply blue threadlocker to hinge screws and to set the lid gap evenly before final torque. It Is Good Practice To Clean the bezel gasket and hinge barrels before reassembly to prevent creaks.
This Post‑Install Checklist Helps You Ship Confidently: run a solid‑color pixel test at multiple brightness levels, verify uniformity and no light bleed, confirm p3 profile selection and color stability, test camera focus and exposure, check ambient light sensor response, wake‑on‑lid, and sleep on close, validate wifi and bluetooth rssi after antenna reconnection, and ensure hinge holds position throughout the range. It Keeps Turnaround Tight while minimizing returns and keeps the Macbook Complete A1707 Screen - Space Grey - OEM Quality performing to factory standards.
The screens are covered with a 2-year warranty. The warranty does not cover man-made damage.
