Complete MacBook Air A3113 Screen Assembly In Starlight
The MacBook Complete A3113 Screen - Starlight - OEM Quality is a full lid assembly built for fast swaps on the 13‑inch MacBook Air (M3, 2024) model A3113. The unit arrives preassembled with lcd, backlight, cover glass, starlight anodized top shell, hinges, display flexes, antenna set, camera module, ambient light sensor, and microphone array.
The .6‑inch liquid retina panel delivers a native resolution of 2560 × 1664 at 224 ppi with a 60 hz refresh rate. The display supports wide color (p3), true tone, and a low‑reflectivity coating for comfortable viewing. The integrated notch houses the 1080p facetime hd camera and sensors, matching original fit and finish for a seamless replacement.
Key Specifications And Included Parts
The panel type is ips lcd with system‑controlled true tone and typical brightness up to 500 nits. The color is starlight with color‑matched hinges and screw covers to maintain a uniform exterior on refurbished units. The glass is fully laminated to the lcd for consistent clarity and reduced parallax.
The assembly includes the lcd panel, backlight, cover glass, upper clamshell, left and right hinges, hinge covers, main display flex, camera and sensor flex, dual microphones, wifi and bluetooth lid antennas, and preinstalled brackets. The connectors match the original board‑side sockets for a direct fit, and true tone is supported when paired with the board and configured in macos. The anti‑reflective finish is tuned to resist fingerprints and preserve contrast, and backlight uniformity is screened to align with oem tolerances.
Repair Notes, Compatibility, And Quality Control
The assembly is compatible only with MacBook Air 13‑inch A3113 (m3, 2024) and is not cross‑compatible with A2681, A2337, or A3114 15‑inch variants. The swap is ideal when glass is cracked, pixels are, the backlight is dim or blotchy, the hinges are loose, the webcam has failed, or the lid is dented and cosmetically out of grade for resale.
The recommended tool set includes p5 pentalobe for the bottom case, t3 or t5 torx for bracketry, and t8 torx for hinge bolts. The process should start with battery isolation, followed by careful cable removal, hinge support during unbolting, and precise hinge alignment during reassembly to avoid panel stress. The flex routing should follow the factory path to pinch points, and final checks should include webcam, microphones, ambient light response, and true tone after system configuration.
Why This Assembly Works Well For Shops
The complete format reduces bench time by eliminating panel separation, bezel heating, and hinge transfers, which helps you keep turnaround tight on warranty or batch refurb work. The oem quality grade matches original luminance, white point targets, and viewing angles, so mixed‑batch fleets remain visually consistent after repair.
The starlight finish lets you restore units with scratched lids to resale‑ready condition without repainting or parts mixing. The packaging uses anti‑static wrapping and edge protection to lower transit damage risk, and each batch is function‑tested for backlight stability, color uniformity, pixel integrity, webcam focus, microphone pickup, and antenna continuity so you can install with confidence.
The screens are covered with a 2-year warranty. The warranty does not cover man-made damage.
