Macbook Complete A1398 Screen 2012-E2013 - Silver - OEM Quality
This Is A Complete Lid Assembly For Macbook Pro Retina 15-Inch A1398 Mid 2012 And Early 2013 In Silver, Built To Oem Quality For A Clean Swap. You Get The Retina Lcd Panel Fused To The Cover Glass, The Aluminum Top Case, Pre-Installed Hinges, Facetime Hd Camera, Display Cable, Backlight Cable, Rubber Bezel, And Integrated Wi‑Fi Antenn.
The Panel Delivers A 15.4 Inch Ips Lcd With Led Backlight And A Native 2880 X 1800 Resolution At 16:10, Offering Wide Viewing Angles And Crisp Detail. The Glossy Cover Glass Matches The Original Look, And The Silver Anodized Housing Aligns Seamlessly With 2012–E2013 Finishes.
Compatibility And Fit Notes For A1398 2012–E2013
This Assembly Fits Macbook Pro Retina 15-Inch A1398 Units From Mid 2012 And Early 2013 Only, Also Known As Macbookpro10,1. You Should Confirm The Year In “About This Mac” Or By Serial Lookup Before Ordering, Because Late 2013–2015 A1398 Assemblies Use Different Internal Connections And Are Not Interchangeable.
Use This Unit To Resolve Cracked Glass, No Backlight, No Image, Color Lines, Flicker, Pressure Marks, Dent Damage To The Lid, Failed Camera, Wobbling Hinges, Or Torn Antenna Leads You Avoid Panel-Level Rework And Micro-Soldering Because All Primary Components Are Already Mounted And Routed.
Key Specifications And Build Details
Screen Size: 15.4 Inch Diagonal Retina Ips Lcd, Led Backlit, Glossy Surface. Native Resolution: 2880 X 1800 At 60 Hz With 16:10 Aspect Ratio. Color: Silver Anodized Aluminum Lid With Black Fused Bezel. Camera: Integrated Facetime Hd Module With Ambient Light Sensor. Antennas: Dual Wi‑ Antennas Embedded In The Clutch Area. Cabling: Factory-Routed Display Data And Backlight Cables With Adhesive Tapes In Place. Hinges: Pre-Installed, Ready To Bolt To The Upper Case Brackets.
Build Matches Original Fit And Alignment Points, Allowing The Lid To Sit Even And Close Smoothly. The Outer Glass Is Bonded To The Panel For A Slim Profile, And The Rubber Edge Gasket Ensures A Tight Seal Against The Palmrest To Help With Dust Control.
Installation Tips For Turnaround
You Should Power Down, Remove The Bottom Case, And Disconnect The Battery Before Touching The Display Connector. You Should Support The Lid When Backing Out The Hinge Screws, Tighten Hinges Evenly From Center Out, And Route The Display Cable Without Twists Before Locking The Connector.
You Can Validate The Repair Before Final Closure By Checking Full-Brightness Backlight Uniformity, Running A Camera Preview, Verifying Sleep On Lid Close, And Confirming Stable Wi‑Fi Signal. You Should Clean The Glass With A Lint-Free Cloth Only And Keep Liquids Away From The Camera Window And Bezel.
The screens are covered with a 2-year warranty. The warranty does not cover man-made damage.
