Macbook A2991 - Trackpad - Space Black - Pulled Original Quality
This Is The Original Force Touch Trackpad For Macbook A2991 In space black, pulled from a donor unit and inspected for consistent performance and color match.
This Unit Delivers precise haptic feedback, pressure sensing, and full multi‑touch gesture support on a scratch‑resistant glass surface.
This Assembly Maintains uniform click response across the entire pad and supports palm rejection for comfortable long‑session use.
Compatibility And Key Technical Data
This Trackpad Fits Macbook A2991 only, which is the space black 16‑inch variant in the current generation lineup.
This Part Uses Apple’s force touch design with an integrated haptic motor and pressure sensors rather than a mechanical switch.
This Finish Matches space black with low‑gloss anodization and PVD‑style dark tone to blend with the palm rest.
This Connection Uses a single flex interface to the logic board via a zif socket on the upper case assembly.
This Mounting System Uses perimeter screws and factory alignment points to set click height and uniform gap.
This Unit Is An oem pulled component graded for consistent response, clean glass, and intact mounting bosses.
Installation Notes For Repair Shops
This Job Requires removing the bottom case, disconnecting the battery, and lifting the trackpad after releasing the mounting screws and brackets.
This Procedure Works best with p5 pentalobe for the bottom cover and t5 or t3 torx for internal fasteners depending on sub‑revision.
This Alignment Should be set with the factory centering marks before final torque to ensure even click force at all corners.
This Connection Should be made only with the battery isolated to avoid transient input or haptic activation.
This Flex Cable May need to be transferred from the original machine if not included with your stock, and the same applies to screws and shims.
This Function Can be verified in macos by testing single click, secondary click, force press, drag, and gesture recognition trackpad settings.
Quality, Testing, And Packaging
This Pulled Original Quality unit is tested for full‑area click uniformity, stable haptic strength, accurate pressure sensing, smooth cursor travel, and reliable palm rejection.
This Component Is inspected for flat glass, clean edges, intact gasket, undamaged connector, and correct haptic acoustics under load.
This Part Ships in an antistatic sleeve with surface protection to prevent dust contamination and scuffs during transit.
This Replacement Is solid choice for units with cracked glass, unresponsive click zones, ghost inputs after liquid exposure, or intermittent flex faults.
This Compatibility Is limited to Macbook A2991 in space black, so you should verify the model number on the bottom case before ordering.
This Trackpad Does not require pairing or serialization, and it is plug‑and‑play once installed and aligned correctly.
The MacBook Trackpad is covered by a 2-year warranty. The warranty does not cover man-made damage.
