MacBook Battery A1185 - OEM Quality For MacBook A1181
Get dependable runtime and clean compatibility with MacBook Battery A1185 - OEM Quality, purpose built for the 13-inch MacBook A1181 series from 2006 to 2009 with the removable bottom-latch battery bay. You get a direct drop-in pack that mates with the original latch and contacts, communicates correctly with macOS battery reporting, and restores mobile use on machines that still earn their keep in service and refurb lines.
The pack uses matched lithium-ion cells and an integrated smart controller for accurate state-of-charge, stable charging curves, and balanced cell management. You can install it in minutes, power up, and go without firmware fiddling or adapter workarounds, making it a strong replacement choice when you need predictable results across multiple units.
Full Specifications For MacBook Battery A1185
The nominal voltage is 10.8 V with a typical capacity of 5200 mAh, which equals roughly 56 Wh under standard conditions. The chemistry is lithium-ion, six-cell configuration, with an expected cycle life of up to 300 full charge cycles when used within normal temperature and charging ranges. The controller supports overcharge, overcurrent, short circuit, and thermal protection, and communicates with the MacBook via the standard SMBus interface for charge percentage and health data.
Compatibility covers MacBook 13-inch A1181 models with the external removable battery bay, commonly identified in service as MacBook1,1 through MacBook4,1. The pack works with the original 45 W MagSafe power adapters and aligns with Apple’s charging profile. Certification and logistics readiness include CE and RoHS compliance and UN38.3-tested cells for transport. Operating temperature is best kept between 10°C and 35°C, with storage at 15°C to 25°C and 40% to 60% state-of-charge to preserve capacity.
A Sturdy Choice For Repair Shops And Refurbishers
You can count on consistent fit and predictable QC outcomes across batches, which helps reduce retests and callbacks on volume jobs. The form factor the factory bay and latch, so you do not need shims, stickers, or frame adjustments during assembly. The smart gauge reports charge and cycle data reliably, which is useful for intake checks and post-repair burn-in documentation when you hand units back to clients or move them through wholesale channels.
Use this pack for lifetime extensions on education fleets, point-of-sale terminals based on A1181 builds, or legacy software rigs where the 13-inch polycarbonate chassis is still in rotation. The stable capacity supports typical office workflows, diagnostics, flashing, and light work without forcing frequent adapter reliance.
Simple Installation, Calibration, And Safety
Power the MacBook down, flip the bottom latch, remove the old pack, seat the new pack, and lock the latch. First charge to 100%, keep it on AC for two additional hours, then run on battery until the MacBook sleeps, leave it asleep for at least five hours, and recharge to full to complete calibration. This routine helps the controller sync with macOS so you see accurate runtime estimates and health status.
Store spares in a cool, dry place at partial charge, avoid crushing or puncture, and keep away from heat sources. Recycle old packs through an approved channel in your country. If you service multiple units, label cycle counts during burn-in and recheck capacity after two complete cycles to confirm the pack has settled into its expected performance window.
The battery is covered with a 1-year product warranty. The warranty does not cover man-made damage or wear and tear. To be used with MacBook model number: A1181
