iPhone 15 Plus - Black - Pulled Diagnostic Screen For Fast Bench Testing
This iPhone 15 Plus - Black - Pulled Diagnostic Screen is an original oled display assembly removed from a working device and prepared for rapid triage on your bench. It arrives as a complete front assembly with the oled panel, digitizer, cover glass, and flexes, making it ideal for quick connector checks, touch verification, and board diagnostics without committing a new part.
It fits model iPhone 15 Plus and matches model id A3094 for european deployments. It features the black bezel for a clean, oem look across any housing color, and it is function tested for display, touch, brightness, and uniformity. It does not include the front sensor assembly or earpiece module, so you will transfer those from the original device if you decide to complete a permanent repair after diagnostics.
Technical Specifications And Compatibility
The panel is an oem super retina xdr oled at 6.7 inches with a 2796 × 1290 resolution 460 ppi. It supports true tone, wide color (p3), haptic touch, and high contrast at approximately 2,000,000:1. Typical full screen brightness reaches around 1000 nits, with up to 1600 nits for hdr highlights and up to 2000 nits peak in outdoor conditions. The refresh rate is 60 hz, and the cover glass is the original ceramic shield type as pulled from device.
The assembly aligns with the dynamic island layout and is mechanically compatible only with iPhone 15 Plus. The flex architecture matches the 15 series design and supports the ambient light and proximity sensor windows when you transfer your original front sensor assembly. Face id functionality resides in the transferred module, so the feature remains active after a correct swap. This screen is not cross compatible with iPhone 15, iPhone 15 Pro, or iPhone 15 Pro Max models.
Installation Details And Use Cases
You can use this pulled diagnostic screen to isolate logic board, display connector, and touch issues, to confirm image output and backlight behavior or to validate post rework results before sealing a device. You get reliable reference performance for color, brightness, touch response, and oled uniformity, which helps speed up intake checks and reduce repeat open ups.
Power down the device, disconnect the battery, and connect the display last. Route flexes without sharp bends, seat connectors evenly, and test on the bench before applying new sealing adhesive. A parts swap may present an important display message until you complete pairing or data transfer with your preferred programmer, and true tone can be preserved by migrating display calibration from the original screen if required by your workflow.
What Is Included And Test Coverage
Included is the iPhone 15 Plus - Black - Pulled Diagnostic Screen assembly with oled panel, digitizer, front glass, and display flexes. Not included are the earpiece speaker, front sensor flex, brackets, mesh gaskets, or adhesive, which should be transferred or replaced as needed.
Each unit is checked for dead pixels, color uniformity, brightness range, white point stability, multi touch grid accuracy, ghost touch absence, and connector integrity. You receive a dependable pulled unit that helps you verify faults fast and move confidently from diagnosis to repair on iPhone 15 Plus model id A3094.
